Blame
|
1 | # Sixunited AXB35 |
||||||
| 2 | One of the first Strix Halo boards, used in many Chinese PCs along with a cooling system. First revisions go back to at least October of 2024 (marked `SU_AXB35_FB11`). |
|||||||
| 3 | ||||||||
|
4 | **Known PCs:** |
||||||
|
5 | - [[GMKtec EVO-X2|Hardware/PCs/GMKtec_EVO-X2]] (V21 & V22) |
||||||
| 6 | - [[Bosgame M5|Hardware/PCs/Bosgame_M5]] |
|||||||
| 7 | - [[FEVM FA-EX9|Hardware/PCs/FEVM_FA-EX9]] (V22 & V30) |
|||||||
| 8 | - [[NIMO AI MiniPC|Hardware/PCs/NIMO_AI_MiniPC]] |
|||||||
|
9 | |||||||
|
10 | ### Power |
||||||
| 11 | The board supports 3 different power limits - 55W (100W burst), 85W (120W burst), and 120W (140W burst): |
|||||||
| 12 |  |
|||||||
| 13 | ||||||||
|
14 | See [[the guide on power and performance|Guides/Power_Modes_and_Performance]] for more info on power modes. |
||||||
|
15 | |||||||
| 16 | Idle power draw from the wall should be around 12W with two SSDs installed. |
|||||||
| 17 | ||||||||
|
18 | ### Cooling |
||||||
| 19 | The cooling system is decent enough for this form factor, but could suffer from inadequate thermal interface conductivity. So if you plan to use a full 120W power limit, switching to PTM7950 or similar products is highly recommended. You'll need a 30x30 mm piece of 0.2-0.25 mm thickness. |
|||||||
| 20 | ||||||||
|
21 | Here's what you could expect from a correctly working system with PTM7950 (ambient temp +25°C, bios version 1.05): |
||||||
|
22 |  |
||||||
| 23 | ||||||||
|
24 | A guide for applying it on EVO-X2 is available [[here|Guides/Sixunited_AXB35/Replacing_Thermal_Interfaces_On_GMKtec_EVO-X2]]. |
||||||
|
25 | |||||||
|
26 | For fan and power mode control on Windows and Linux check out [[this guide|Guides/Sixunited_AXB35/Power_Mode_and_Fan_Control]]. |
||||||
|
27 | |||||||
|
28 | ### Facts |
||||||
|
29 | - RAM modules: [MT62F4G32D8DV-023](https://www.micron.com/products/memory/dram-components/lpddr5x/part-catalog/part-detail/mt62f4g32d8dv-023-wt-c) |
||||||
|
30 | - EC: ITE IT5570E-128 |
||||||
| 31 | - Heatsink mount: 75x75 mm |
|||||||
| 32 | - RAM thermal pads thickness: 0.5 mm |
|||||||
|
33 | - Power input: 19.5V, 5.5x2.5mm barrel jack, center positive |
||||||
|
34 | |||||||
| 35 | ### Firmware |
|||||||
|
36 | See [[Firmware|Hardware/Boards/Sixunited_AXB35/Firmware]] page. |
||||||
|
37 | |||||||
| 38 | ### Photos |
|||||||
|
39 | |||||||
|
40 | | Photo | Description | |
||||||
| 41 | | -------- | -------- | |
|||||||
|
42 | | [](./axb35-02.jpeg) | AXB35-02 V21 from GMKtec EVO-X2 | |
||||||
|
43 | | [](./axb35-02-v22.jpeg) [](./axb35-02-v22-back.jpeg) | AXB35-02 V22 from more recent GMKtec EVO-X2 | |
||||||
|
44 | | [](./fa-ex9-board-mark.jpg) | AXB35-02 V22 in FEVM FA-EX9 | |
||||||
|
45 | | [](./axb35-02-v30.jpeg) | AXB35-02 V30 in FEVM FA-EX9 | |
||||||
|
46 | | [](./axb35_board_with_cooling.jpg) | Earlier revision of the board with the cooling system | |
||||||
|
47 | |||||||
| 48 | ### Relevant Pages |
|||||||
|
49 | - [[Hardware/Boards/Sixunited_AXB35/Firmware]] |
||||||
| 50 | - [[Guides/Sixunited_AXB35]] |
|||||||